My Garage
Cart

OEM 2005 Ford F-150 Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

  • 2005 Ford F-150 Brake Master Cylinder - 7L3Z-2140-A
    2005 Ford F-150 Brake Master Cylinder Diagram - 7L3Z-2140-A
    View related parts
    Product Specifications
    • Other Name: Cylinder Assembly - Master; Brake Master Cylinder
    • Replaces: 6L3Z-2140-A
    • Base No.: 2140
    • Item Weight: 5.40 Pounds
    • Item Dimensions: 9.5 x 7.3 x 9.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7L3Z-2140-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford F-150 Submodels:
    • FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2005 Ford F-150 Brake Master Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Brake Master Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Brake Master Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-150 Brake Master Cylinder Parts Questions & Experts Answers

  • Q: How to service and repair the brake master cylinder on 2005 Ford F-150?
    A: Service and repair of the brake master cylinder starts by disconnecting the battery power. A suitable suction device should be used for draining the brake fluid reservoir followed by disconnecting the electrical connector of the brake fluid level switch. The service and repair process for the brake master cylinder starts with brake lines capping and master cylinder port plugging before two brake line disconnection from the master cylinder while aiming for nut torque at 17 Nm (13 ft. lbs.) during reassembly. The master cylinder nuts need to be removed before installation where proper torque settings should be 25 Nm (18 ft. lbs.). To finish the job bleed the brake system after performing the removal steps in reverse order. Brake components will suffer permanent damage from improper fluids as non-DOT 3 motor vehicle brake fluid disables the braking system. Individuals need to maintain proper caution when handling brake fluid due to its content of polyglycol ethers and polyglycols which could result in harm; immediate eye contact should be avoided and frequent handwashing is essential after contact and medical staff must be consulted if skin irritation develops. Wet paint and plastic surfaces will become damaged by brake fluid, requiring an immediate cleaning with water.

Related 2005 Ford F-150 Parts