Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Ford F-150 Flywheel Ring Gear

Clutch Flywheel Ring Gear
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel Ring Gear found

  • 2005 Ford F-150 Flywheel Ring Gear - C5AZ-6384-D
    2005 Ford F-150 Flywheel Ring Gear Diagram - C5AZ-6384-D
    View related parts

    2005 Ford F-150 Ring Gear Part Number: C5AZ-6384-D

    $52.65 MSRP: $71.65
    You Save: $19.00 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Gear - Flywheel Ring; Clutch Flywheel Ring Gear; Gear
    • Base No.: 6384
    • Item Weight: 6.10 Pounds
    • Item Dimensions: 21.0 x 18.5 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: C5AZ-6384-D
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford F-150 Submodels:
    • Base, Custom, Eddie Bauer, Lightning, Special, STX, XL, XLT, XLT Lariat | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS

2005 Ford F-150 Flywheel Ring Gear

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Flywheel Ring Gear available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Flywheel Ring Gear as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-150 Flywheel Ring Gear Parts Q&A

  • Q: How to Properly Handle and Install the Flywheel Ring Gear on 2005 Ford F-150?
    A: The service process for the flywheel ring gear starts with removing the flywheel first. The process of removing the flywheel ring gear requires equal tapping to stop interferences from developing. A brass drift should drive the heated flywheel ring gear from the flywheel only after subjecting it to even heat. The installation of the flywheel ring gear requires heating the component to no higher than 278°C (500°F) using heat indicating crayons while continuously moving the torch to prevent localized hot zones. The installation of the flywheel ring gear needs the bevelled section to face toward the rear of the flywheel. The installation process ends with the placement of the flywheel ring gear on the flywheel by using a brass drift followed by reinstallation of the flywheel.

Related 2005 Ford F-150 Parts

Alternate Year Models

+
2006 Ford F-150 Flywheel Ring Gear