How to Service and Repair the Vapor Canister on 2005 Ford F-150?

Vehicle service and repair of the evaporative emission control canister should begin with NEUTRAL gear positioning on a hoist. The installation of a battery ground cable disconnect will prevent electrical sparks from igniting fuel vapors. You must locate the EVAP canister assembly above the spare tire before disconnecting its fuel vapor quick connect fitting along with its fuel vapor hose. Reinstall the six bolts of the EVAP canister assembly bracket with screws to 13 Nm (10 lb-ft) torque. Separate the EVAP canister vent solenoid harness push pin retainer followed by disconnecting its electrical connector. To perform the repair separate both the EVAP canister assembly and the heat shield unit. Early build vehicles require users to remove the EVAP canister hose that leads from the filter to the canister. Removal of the EVAP canister leads to reinstallation where you will follow the reverse process of removal steps.

OEM 2005 Ford F-150 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2005 Ford F-150 Vapor Canister
Part Number: 4L3Z-9D653-BA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid; Canister
- Manufacturer Note: Vapor Canister
- Base No.: 9D653
- Item Weight: 5.70 Pounds
- Item Dimensions: 7.3 x 5.0 x 29.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2005 Ford F-150 Vapor Canister
Part Number: 4L3Z-9D653-AA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 11.40 Pounds
- Item Dimensions: 7.9 x 30.3 x 17.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2005 Ford F-150 Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-150 Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-150 Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-150 Vapor Canister Parts Questions & Experts Answers

Q: How to Service and Repair the Vapor Canister on 2005 Ford F-150?
A: Vehicle service and repair of the evaporative emission control canister should begin with NEUTRAL gear positioning on a hoist. The installation of a battery ground cable disconnect will prevent electrical sparks from igniting fuel vapors. You must locate the EVAP canister assembly above the spare tire before disconnecting its fuel vapor quick connect fitting along with its fuel vapor hose. Reinstall the six bolts of the EVAP canister assembly bracket with screws to 13 Nm (10 lb-ft) torque. Separate the EVAP canister vent solenoid harness push pin retainer followed by disconnecting its electrical connector. To perform the repair separate both the EVAP canister assembly and the heat shield unit. Early build vehicles require users to remove the EVAP canister hose that leads from the filter to the canister. Removal of the EVAP canister leads to reinstallation where you will follow the reverse process of removal steps.