FordParts
My Garage
My Account
Cart
OEM 2006 Ford F-250 Super Duty A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2006 Ford F-250 Super Duty Condenser Part Number: 6C3Z-19712-AB
Product Specifications- Other Name: Kit - Air Conditioning Condenser; A/C Condenser
- Replaces: F81Z-19712-AA, 6C3Z-19712-AA, YJ-472
- Base No.: 19712
- Item Weight: 13.30 Pounds
- Item Dimensions: 27.5 x 6.2 x 38.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19712-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty Condenser Part Number: 6C3Z-19712-BB
Product Specifications- Other Name: Kit - Air Conditioning Condenser; A/C Condenser
- Replaces: 6C3Z-19712-BA, YJ-473, 3C3Z-19712-AA
- Base No.: 19712
- Item Weight: 14.10 Pounds
- Item Dimensions: 28.0 x 5.9 x 37.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19712-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-250 Super Duty A/C Condenser Parts Q&A
- Q: How to service and repair the A/C condenser core on 2006 Ford F-250 Super Duty?A: Service and repair operations for the A/C condenser core require a step of refrigerant recovery before beginning. A leak test should be performed before removal when there are leak suspicions. The procedure starts with removing the pin-type retainers attached to 9 pins and sight shield components followed by air deflector disassembly. It is necessary to disconnect the A/C condenser core inlet and outlet lines before reinstallation while tightening them to 8 Nm (71 lb-in) and then disposing of the O-ring seals. Mark the hood latch location for realignment and reinstall it after screw removal by tightening screws to 12 Nm (9 lb-ft). The next step includes removing screws securing both the RH and LH A/C condenser core mounting brackets before installation when securing with a torque of 10 Nm (89 lb-in). Reverse the removal process to install the A/C condenser core while using fresh O-ring seals and adding the appropriate amount of clean PAG oil as refrigerant system lubricant. The last step includes evacuation along with leak testing and charging the refrigerant system.