FordParts
My Garage
My Account
Cart
OEM 2005 Ford Focus A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2005 Ford Focus Condenser Part Number: YS4Z-19712-AB
$282.15 MSRP: $390.33You Save: $108.18 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: YS4Z-19712-AA
- Base No.: 19712
- Item Weight: 8.60 Pounds
- Item Dimensions: 33.6 x 6.2 x 22.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-19712-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Focus Condenser Part Number: 6S4Z-19712-A
Product Specifications- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: 5S4Z-19712-AB
- Base No.: 19712
- Item Weight: 9.10 Pounds
- Item Dimensions: 6.0 x 34.6 x 21.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-19712-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Focus A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Focus A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Focus A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Focus A/C Condenser Parts Q&A
- Q: How to Service and Repair the A/C Condenser Core on 2005 Ford Focus?A: Begin service and repair of the condenser core by securing the vehicle on a hoist while placing the gear selector at neutral. Remove the lower deflector of the radiator while recovering the refrigerant. The condenser core receives its refrigerant lines disconnected while O-ring seals need disposition. A transmission jack or equal device should support the radiator crossmember before removing the four lower radiator support bolts. The installation process begins by unclipping the condenser pin followed by moving the condenser core to the side before removing it. Reverse the removal method during installation with new O-ring seals which need cleaning mineral oil before use. The refrigerant system requires correct lubrication with clean PAG refrigerant compressor oil F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent product meeting Ford specification WSH-M1C231-B. Evacuation and leak testing along with system charging require the use of F73Z-19577-AA (Motorcraft YN-9-A) mineral oil as a refrigerant system O-ring seal lubricant but not as an A/C compressor lubricant.