FordParts
My Garage
My Account
Cart
OEM 2005 Ford Mustang Air Bag Sensor
Air Bag Impact Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Air Bag Sensors found
2005 Ford Mustang Side Impact Sensor Part Number: 6R3Z-14B345-AB
Product Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Replaces: 4R3Z-14B345-AA
- Base No.: 14B345A
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 3.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6R3Z-14B345-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Mustang Front Impact Sensor Part Number: 6R3Z-14B345-BB
Product Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Impact Bag; Side Sensor
- Position: Front
- Replaces: 6R3Z-14B345-BA
- Base No.: 14B345
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-14B345-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Mustang Air Bag Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Mustang Air Bag Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Mustang Air Bag Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Mustang Air Bag Sensor Parts Q&A
- Q: What Precautions Should Be Taken When Servicing the Front Air Bag Sensor on 2005 Ford Mustang?A: Safety glasses should be worn during front impact severity sensor servicing procedures to protect against potential injuries from possible air bag activations. Correct orientation of the vehicle sensor is essential for proper system operation but check the sensor mount and wiring pigtail for deformation after any collision and maintain or change sensor position together with any impaired supplemental restraint system parts across all situations. Do not use memory saver devices because they increase the possibility of personal injuries. When the RCM fuse is removed along with switching the ignition ON the air bag warning lamp will automatically light up without indicating any issues. Inspect the SRS system for complete functionality while checking for any faults during vehicle release inspection. The repair process calls for installation of new components as the first step before returning to the original parts if the issue remains unresolved and repeating diagnostic steps. Start by powering down the system followed by retainer and radiator upper air deflector removal. Detach the electrical connector from the sensor located at the front impact severity device. Tighten the retaining bolt for the air bag front impact severity sensor to 12 Nm (9 lb-ft) as per required specifications. Wash all mating surfaces between the radiator support and the sensor along with inspecting their locator tabs for attracting the correct position. The removal process should be inverted to install the new sensor during which time the system also requires power restoration.