FordParts
My Garage
My Account
Cart
OEM 2006 Ford Mustang Air Bag Sensor
Air Bag Impact Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Air Bag Sensors found
2006 Ford Mustang Side Impact Sensor Part Number: 6R3Z-14B345-AB
Product Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Replaces: 4R3Z-14B345-AA
- Base No.: 14B345A
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 3.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6R3Z-14B345-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Mustang Front Impact Sensor Part Number: 6R3Z-14B345-BB
Product Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Impact Bag; Side Sensor
- Position: Front
- Replaces: 6R3Z-14B345-BA
- Base No.: 14B345
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-14B345-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Mustang Air Bag Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Mustang Air Bag Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Mustang Air Bag Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Mustang Air Bag Sensor Parts Q&A
- Q: What Precautions Should Be Taken When Servicing the Front Air Bag Sensor on 2006 Ford Mustang?A: Decision makers should always use safety glasses because they protect eyes from possible injuries that could occur from the air bag suddenly deploying. Proper system operation requires correct orientation of the vehicle sensor while all supplemental restraint system components including the sensor need replacement after collision-related deformation especially when air bags did not deploy. The use of memory saver devices should be avoided to prevent personal injuries. Removing the RCM fuse combined with turning on the ignition switch will activate the air bag warning lamp because this is how the supplemental restraint system operates correctly. Check the SRS system functionality and eliminate all faults from the system before sending the vehicle to the customer. The repair process requires substituting a new component yet if faults remain the initial component should be reinstated followed by diagnostic steps re-execution. To start replace the power with the system off followed by retainer evacuation and radiator upper air deflector consecutively. You should disconnect the front impact severity sensor electrical connector while removing its retaining bolt with care to keep both surfaces of the radiator support and the sensor free of debris. Record the location of the locator tabs since you need this information for reassembly. The procedure for sensor installation includes tightening the retaining bolt to 12 Nm (9 lb-ft) before following all removal steps to restore system power.