Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Side Marker Light; Headlight Bulbs; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs
Position: Front
Replaces: F5DZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YU5Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
Appearance, Base, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb And Socket Assembly; Headlight Bulbs; Car Bulbs; High Beam Bulb
Base No.: 13N021A
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 2C5Z-13N021-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
2005 Lincoln LS Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln LS Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2005 Lincoln LS?
A: The first step to service the headlamp bulb starts with pulling out the assembly of the headlamp. Start by removing the four screws attaching the low beam access cover then take out the cover together with any seal present. The bulb needs careful handling because its gas-filled envelope contains pressure so it may shatter from envelope scratches or a dropped bulb position; operate only by gripping the base section and steer clear of touching the glass material. Leave the bulb embedded until the very moment you need to install a new one since both conditions would jeopardize performance and authorize contaminant entry into the headlamp housing. A proper installation of the new bulb requires you to follow the same steps backward. The process for the high beam bulb begins by unscrewing its four access cover screws followed by removing the high beam access cover along with its seal. Proceed with disconnecting the electrical connector taking the same steps as when handling the low beam bulb. Put on the new bulb by proceeding through the same reversal of each removal step.