How to properly service and repair the Fuel Pump Driver Module on 2005 Lincoln Navigator?

To service the Fuel Pump Driver Module (FPDM) lift the car in neutral and remove the battery ground. Find the FPDM on the left rail of the frame, unscrew the connection, unscrew the securing bolts and remove the module. Reassemble using bolts to 10 Nm (89 lb-in) and reverse.

OEM 2005 Lincoln Navigator Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
2005 Lincoln Navigator Control Module Part Number: 5L8Z-9D370-A
$117.94 MSRP: $228.89
You Save: $110.95 (49%)
ADD TO CART
Product Specifications
- Other Name: Control Unit; Fuel Pump Driver Module; Fuel Pump Housing; Fuel Pump Controller; Module
- Replaces: 4L2Z-9D372-AA, 4L2Z-9D372-BA, 6L2Z-9D372-A, 7R3Z-9D372-BA, 4L2Z-9D372-A, 5L3Z-9D370-A
- Base No.: 9D370
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.5 x 4.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9D370-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2005 Lincoln Navigator Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Navigator Fuel Pump Driver Module Parts Q&A

Q: How to properly service and repair the Fuel Pump Driver Module on 2005 Lincoln Navigator?
A: To service the Fuel Pump Driver Module (FPDM) lift the car in neutral and remove the battery ground. Find the FPDM on the left rail of the frame, unscrew the connection, unscrew the securing bolts and remove the module. Reassemble using bolts to 10 Nm (89 lb-in) and reverse.