How to Service the Floor Defrost Blend Door Actuator on 2005 Mercury Grand Marquis?

Service of the floor defrost door vacuum control motor should start with disconnecting the battery ground cable. The next step involves removing the LH lower dash insulator panel together with disconnecting the lamp. Remove the two pin-type retainers to access the fill panel before removing all screws on it along the way. You should first cut off the vacuum line before unscrewing the lighting module and clip release. You can reach the floor/defrost door vacuum control motor by disconnecting its electrical connectors then removing screws and bracket. Remove first the clip and nuts before extracting the motor from its position then disconnect all vacuum lines. The installation ends when you follow the steps backwards which you used for removal.

OEM 2005 Mercury Grand Marquis Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2005 Mercury Grand Marquis Door Actuator
Part Number: XW7Z-19E616-BA
$47.22 MSRP: $76.18
You Save: $28.96 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator Assembly
- Replaces: F8VZ-19E616-BA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 7.7 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW7Z-19E616-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Grand Marquis Submodels:
- GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2005 Mercury Grand Marquis Door Actuator
Part Number: AW7Z-19E616-A
$50.95 MSRP: $80.91
You Save: $29.96 (38%)
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator Assembly
- Replaces: 1W7Z-19E616-AA, XW7Z-19E616-AA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 7.7 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AW7Z-19E616-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Mercury Grand Marquis Submodels:
- GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2005 Mercury Grand Marquis Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Grand Marquis Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Grand Marquis Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Mercury Grand Marquis Blend Door Actuator Parts Questions & Experts Answers

Q: How to Service the Floor Defrost Blend Door Actuator on 2005 Mercury Grand Marquis?
A: Service of the floor defrost door vacuum control motor should start with disconnecting the battery ground cable. The next step involves removing the LH lower dash insulator panel together with disconnecting the lamp. Remove the two pin-type retainers to access the fill panel before removing all screws on it along the way. You should first cut off the vacuum line before unscrewing the lighting module and clip release. You can reach the floor/defrost door vacuum control motor by disconnecting its electrical connectors then removing screws and bracket. Remove first the clip and nuts before extracting the motor from its position then disconnect all vacuum lines. The installation ends when you follow the steps backwards which you used for removal.