FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Mountaineer Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2005 Mercury Mountaineer Stabilizer Link, Front Part Number: 2L2Z-5K483-A
$26.79 MSRP: $42.55You Save: $15.76 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Link; Suspension Stabilizer Bar Link, Front; Sway Bar Link; Link
- Position: Front
- Replaces: 3L2Z-5K483-AA
- Base No.: 5K483
- Item Weight: 0.90 Pounds
- Item Dimensions: 15.2 x 10.6 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L2Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Stabilizer Link, Rear Part Number: 1L2Z-5K484-AA
$26.32 MSRP: $42.73You Save: $16.41 (39%)Product Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Base No.: 5K484
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1L2Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Mountaineer Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Mountaineer Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Mountaineer Sway Bar Link Parts Q&A
- Q: How to Service and Repair a Sway Bar Link and Sway Bar Kit on 2005 Mercury Mountaineer?A: The sway bar link service requires removal and discarding of the two Sway Bar Kit nuts and grommets followed by the Sway Bar Kit stud extraction. Reinstall the Sway Bar Kit studs then tighten them to 25 Nm (18 ft. lbs.). The next step requires removing two sway bar links before thoroughly checking and cleaning the mating surfaces and internal threads while removing all foreign material and thread locking compound. Remove the four Sway Bar Kit-to-frame bolts because replacement with new hardware is required before tightening them to 70 Nm (52 ft. lbs.) torque specification. The next step requires removing both Sway Bar Kit brackets and the Sway Bar Kit from its position. You should check the bushings for signs of wear or damage then replace them if needed before removing the two sway bar bushings. The installation ends by following the removal steps backward while using fresh Sway Bar Kit-to-frame bolts together with new Sway Bar Kit nuts and grommets.