Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
2006 Ford E-250 Axle Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford E-250 Axle Shaft Parts Questions & Experts Answers
Q: How to service and repair the full floating axle of a Dana axle shaft on 2006 Ford E-250?
A: Start the Dana axle shaft full floating axle service and repair process by unscrewing the bolts then setting up a drain pan underneath the rear hub. Inspect the damaged rear axle shaft gasket while you remove the axle shaft before replacing it with a new gasket if required. Assess the axle shaft for any cracks that appear near the bolt attachment points. A suitable thread adhesive should be applied to the original bolts when you plan to reuse them. Both SRW and DRW vehicles need 133 Nm (99 ft. lbs.) when tightening axle bolt installation per specifications. The process completion requires performing the reverse steps used for removal at the final stage.