How to Service and Repair the Floor/Defrost Blend Door Actuator on 2006 Ford E-250?

The service and repair procedure for the floor/defrost door vacuum control motor starts with panel removal. The flooring defrost vacuum control motor requires the removal of its vacuum connectors at this point. After disconnecting the vacuum connectors from the floor/defrost door vacuum control motor remove its two securing screws. After you remove the screws you will extract the floor/defrost door vacuum control motor from its position. Reinstall the floor/defrost door vacuum control motor by starting with the reverse order of removal steps.

OEM 2006 Ford E-250 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2006 Ford E-250 Temperature Door Actuator Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 4.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2006 Ford E-250 Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Blend Door Actuator Parts Q&A

Q: How to Service and Repair the Floor/Defrost Blend Door Actuator on 2006 Ford E-250?
A: The service and repair procedure for the floor/defrost door vacuum control motor starts with panel removal. The flooring defrost vacuum control motor requires the removal of its vacuum connectors at this point. After disconnecting the vacuum connectors from the floor/defrost door vacuum control motor remove its two securing screws. After you remove the screws you will extract the floor/defrost door vacuum control motor from its position. Reinstall the floor/defrost door vacuum control motor by starting with the reverse order of removal steps.