How to service and repair the auxiliary evaporator outlet and inlet A/C Hose on 2006 Ford Freestar?

Begin the servicing and repair of auxiliary evaporator outlet and inlet lines by hanging the vehicle on a hoist within neutral position. The service demands refrigerant retrieval together with removal of front auxiliary outlet and inlet line fittings which includes removal of nuts and line bracket while discarding O-ring seals. The fitting torque requirement for installation should be set at 8 Nm (71 lb-in). Start by taking out the three bolts and putting the shield to the side followed by removing the fittings from the front tube-in-tube fitting while discarding the O-ring seals. The technician removes line brackets together with front auxiliary evaporator outlet and inlet lines before disconnecting the rear tube-in-tube fitting. All excess O-ring seals will be discarded. Safely remove the bolts after you disconnect the line brackets to remove the auxiliary tube-in-tube assembly. The installation process starts with reversing the removal procedures while using new O-ring seals and filling the refrigerant system with the right amount of clean PAG oil. The refrigerant system requires evacuation after which you should perform leak testing and charge the system.

OEM 2006 Ford Freestar A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Hoses found

View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19835-AB
$373.57 MSRP: $516.80
You Save: $143.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose Assembly; A/C Hose
- Replaces: YF-3149, 6F2Z-19835-AA
- Base No.: 19835C
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.1 x 28.3 x 39.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19835-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Hose & Tube Assembly Part Number: 6F2Z-19D850-BC
$153.28 MSRP: $212.04
You Save: $58.76 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Suction Hose; A/C Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 6F2Z-19D850-BB
- Base No.: 19D850
- Item Weight: 6.30 Pounds
- Item Dimensions: 13.9 x 6.4 x 41.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19D850-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19835-EA
$88.78 MSRP: $120.81
You Save: $32.03 (27%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Pipe; A/C Refrigerant Liquid Hose; A/C Hose; A/C Hoses
- Manufacturer Note: Evaporator To Accumulator
- Replaces: 5F2Z-19835-BA
- Base No.: 19835A
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.9 x 12.7 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19835-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19867-A
$18.18 MSRP: $24.74
You Save: $6.56 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 3F2Z-19867-AA
- Base No.: 19867
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.1 x 6.1 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19867-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19835-A
$15.99 MSRP: $21.75
You Save: $5.76 (27%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 3F2Z-19835-AC
- Base No.: 19835
- Item Weight: 1.90 Pounds
- Item Dimensions: 2.1 x 4.7 x 25.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19835-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19835-BA
$51.24 MSRP: $70.88
You Save: $19.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose Assembly; A/C Hose
- Manufacturer Note: Condenser To Evaporator
- Base No.: 19835C
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.3 x 13.5 x 40.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Discharge Line Part Number: 6F2Z-19867-CA
$30.91 MSRP: $42.76
You Save: $11.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Base No.: 19867
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 5.3 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19867-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Hose & Tube Assembly Part Number: 6F2Z-19D850-AB
Product Specifications
- Other Name: Tube - Compressor To; A/C Refrigerant Suction Hose; A/C Hose Assembly; A/C Refrigerant Liquid Hose; Tube - Compressor To Manifold; A/C Hose
- Manufacturer Note: Manifold And Tube Assy
- Base No.: 19D850
- Item Weight: 3.00 Pounds
- Item Dimensions: 12.8 x 6.1 x 40.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19D850-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar A/C Line Part Number: 6F2Z-19835-DA
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hoses; A/C Hose
- Manufacturer Note: Auxiliary Return
- Base No.: 19835
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.0 x 12.7 x 38.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19835-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2006 Ford Freestar A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestar A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestar A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Freestar A/C Hose Parts Q&A

Q: How to service and repair the auxiliary evaporator outlet and inlet A/C Hose on 2006 Ford Freestar?
A: Begin the servicing and repair of auxiliary evaporator outlet and inlet lines by hanging the vehicle on a hoist within neutral position. The service demands refrigerant retrieval together with removal of front auxiliary outlet and inlet line fittings which includes removal of nuts and line bracket while discarding O-ring seals. The fitting torque requirement for installation should be set at 8 Nm (71 lb-in). Start by taking out the three bolts and putting the shield to the side followed by removing the fittings from the front tube-in-tube fitting while discarding the O-ring seals. The technician removes line brackets together with front auxiliary evaporator outlet and inlet lines before disconnecting the rear tube-in-tube fitting. All excess O-ring seals will be discarded. Safely remove the bolts after you disconnect the line brackets to remove the auxiliary tube-in-tube assembly. The installation process starts with reversing the removal procedures while using new O-ring seals and filling the refrigerant system with the right amount of clean PAG oil. The refrigerant system requires evacuation after which you should perform leak testing and charge the system.