How to Service the A/C Accumulator in the HVAC System on 2006 Ford Freestar?

To maintain the HVAC suction accumulator, remove refrigerant, take-off A/C fitting nuts, and dispose of O-rings. Unbolt 3 bolts and pull out the accumulator, disconnect A/C cycling switch and pull out. Install new O-rings, clean PAG oil. Evacuate, leak test and charge the system. Change the accumulator when it is contaminated.

OEM 2006 Ford Freestar A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
2006 Ford Freestar Accumulator Part Number: 6F2Z-19C836-AB
$66.88 MSRP: $92.52
You Save: $25.64 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Accumulator; A/C Receiver Drier
- Replaces: 6F2Z-19C836-AA, YF-3155
- Base No.: 19C836
- Item Weight: 2.70 Pounds
- Item Dimensions: 9.0 x 6.8 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-19C836-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2006 Ford Freestar A/C Accumulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestar A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestar A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Freestar A/C Accumulator Parts Q&A

Q: How to Service the A/C Accumulator in the HVAC System on 2006 Ford Freestar?
A: To maintain the HVAC suction accumulator, remove refrigerant, take-off A/C fitting nuts, and dispose of O-rings. Unbolt 3 bolts and pull out the accumulator, disconnect A/C cycling switch and pull out. Install new O-rings, clean PAG oil. Evacuate, leak test and charge the system. Change the accumulator when it is contaminated.