How to service and repair the front seat cushion for bucket and 40 percent seats on 2006 Ford Ranger?

Safety glasses should be worn when servicing and repairing front seat cushions on bucket and 40 percent seats because of the safety belt pretensioner that functions as a pyrotechnic device. Proceed only after depowering the SRS because the air bag warning lamp will illuminate with the RCM fuse removed in the ON ignition switch position but this indicates no fault exists. Full operational readiness and absence of faults in the SRS must exist prior to returning the vehicle to customers. Begin by disabling the SRS system and proceed with removing both the seat along with its backrest component. To detach the seat cushion assembly you first need to disassemble its four frame-to-seat cushion pan bolts. The four bolts of the seat cushion assembly must be positioned and tightened to 11 Nm (8 lb-ft) after secure attachment. Replace the seat backrest and seat and activate the SRS system power.

OEM 2006 Ford Ranger Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Cushions found

View related parts
2006 Ford Ranger Seat Cushion Pad, Front Driver Side Part Number: 5L5Z-10632A23-AA
$162.38 MSRP: $236.37
You Save: $73.99 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front, Front Left; Seat Cushion
- Position: Front Driver Side
- Base No.: <632A22
- Item Weight: 3.10 Pounds
- Item Dimensions: 27.6 x 16.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A23-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Seat Back Pad, Front Part Number: 6L5Z-1064810-A
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left, Front Right
- Manufacturer Note: RH/LH
- Position: Front
- Base No.: <64810
- Item Weight: 10.50 Pounds
- Item Dimensions: 41.6 x 20.8 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-1064810-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Seat Cushion Pad, Front Passenger Side Part Number: 5L5Z-10632A22-AA
Product Specifications
- Other Name: Pad; Seat Cushion Pad, Front, Front Left, Front Right; Seat Cushion
- Manufacturer Note: RH/LH
- Position: Front Passenger Side
- Base No.: <632A22
- Item Weight: 4.40 Pounds
- Item Dimensions: 28.4 x 14.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2006 Ford Ranger Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Seat Cushion Parts Q&A

Q: How to service and repair the front seat cushion for bucket and 40 percent seats on 2006 Ford Ranger?
A: Safety glasses should be worn when servicing and repairing front seat cushions on bucket and 40 percent seats because of the safety belt pretensioner that functions as a pyrotechnic device. Proceed only after depowering the SRS because the air bag warning lamp will illuminate with the RCM fuse removed in the ON ignition switch position but this indicates no fault exists. Full operational readiness and absence of faults in the SRS must exist prior to returning the vehicle to customers. Begin by disabling the SRS system and proceed with removing both the seat along with its backrest component. To detach the seat cushion assembly you first need to disassemble its four frame-to-seat cushion pan bolts. The four bolts of the seat cushion assembly must be positioned and tightened to 11 Nm (8 lb-ft) after secure attachment. Replace the seat backrest and seat and activate the SRS system power.