FordParts
My Garage
My Account
Cart
OEM 2007 Ford Ranger Seat Cushion
Seat Pad Cushion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Seat Cushions found
2007 Ford Ranger Seat Cushion Pad, Front Driver Side Part Number: 5L5Z-10632A23-AA
$162.38 MSRP: $236.37You Save: $73.99 (32%)Product Specifications- Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front, Front Left; Seat Cushion
- Position: Front Driver Side
- Base No.: <632A22
- Item Weight: 3.10 Pounds
- Item Dimensions: 27.6 x 16.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A23-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Ranger Seat Back Pad, Front Part Number: 6L5Z-1064810-A
Product Specifications- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left, Front Right
- Manufacturer Note: RH/LH
- Position: Front
- Base No.: <64810
- Item Weight: 10.50 Pounds
- Item Dimensions: 41.6 x 20.8 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-1064810-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Pad; Seat Cushion Pad, Front, Front Left, Front Right; Seat Cushion
- Manufacturer Note: RH/LH
- Position: Front Passenger Side
- Base No.: <632A22
- Item Weight: 4.40 Pounds
- Item Dimensions: 28.4 x 14.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Ranger Seat Cushion
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Ranger Seat Cushion Parts Q&A
- Q: How to service the front seat cushion on 2007 Ford Ranger?A: Begin the front seat cushion service by putting on safety glasses while depowering the supplemental restraint system (SRS) to avoid accidental air bag activation. Start by taking out the affected seat component followed by dismantling armrest and seat backrest assembly and seat track. Detachment of the seat track position sensor, and the two screws from the seat track marks the first step along with removing J-clips from the trim cover. Before unclipping the pin-type retainer to remove the seat backrest latch release cable one must observe the cable route within the seat cushion frame. The next step requires separation of the seat cushion frame from the foam pad and removal of all hog ring rows to remove the seat cushion trim cover. Place the cushion trim cover on top of the foam pad before you fasten it using hog rings for assembly. Reverse the installation process by placing the seat cushion foam pad then the seat cover back on the frame while correctly routing the seat backrest latch release cable and attaching the pin-type retainer. First connect the trim cover J-clip then place back the seat track position sensor and screws after reattaching the seat track followed by backrest assembly and armrest before reinstalling the affected seat. After reassembly of the components it is necessary to repower the SRS to finalize the service procedure.
Related 2007 Ford Ranger Parts
2007 Ford Ranger Seat Cover
2007 Ford Ranger Hood
2007 Ford Ranger Cup Holder
2007 Ford Ranger Floor Pan
2007 Ford Ranger Armrest
2007 Ford Ranger Cigarette Lighter
2007 Ford Ranger Glove Box
2007 Ford Ranger Tailgate Latch
2007 Ford Ranger Door Check
2007 Ford Ranger Washer Reservoir
2007 Ford Ranger Windshield Washer Nozzle
2007 Ford Ranger Windshield Wiper