OEM 2006 Ford Taurus Ignition Lock Cylinder

2006 Ford Taurus Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to service a non-functional ignition lock cylinder on 2006 Ford Taurus?

  A: The first step to service an non-operational ignition lock cylinder involves removing the steering wheel assembly then removing the ignition switch cylinder cap. The inoperative lock cylinder needs disposal but a new lock cylinder can be assembled according to guidelines found in the lock repair package (F85Z-11582-AA) for key code matching purposes. Use a 1/8-inch diameter drill bit to remove the lock cylinder retaining pin before using a 3/8-inch drill bit to drill down the middle of the ignition lock key slot until the ignition switch lock cylinder breaks loose. The broken ignition switch lock cylinder needs disposal and owners must thoroughly clean remaining drill debris from the steering column before moving forward. After removing the bearing retainer and bearing and gear it is important to inspect the steering column for any damage while cleaning out all drill bits from its surface. Begin by installing the gear together with the bearing before fitting the bearing retainer. Finally you must check the new ignition switch lock cylinder's function through testing. The process of removing and installing the steering wheel requires reviewing and following all warnings together with instructions to minimize serious personal injury during this procedure.