OEM 2006 Lincoln Mark LT A/C Condenser

2006 Lincoln Mark LT A/C Condenser Parts Questions & Experts Answers

• Q: How to Service and Repair the A/C Condenser Core on 2006 Lincoln Mark LT?

  A: Service and repair of the condenser core starts with refrigerant recovery followed by condenser fitting disconnect and O-ring seal discarding. The installation process requires screwing both condenser fittings to 25 Nm tension (18 lb-ft torque). After removing both transmission oil cooler securing bolts position the cooling device aside while reinstalling the bolts at 12 Nm (9 lb-ft). Widen the hood latch bracket by removing three bolts before setting the bracket aside but retighten these bolts at 12 Nm (9 lb-ft). Locate the two bolts on the condenser bracket then detach them before reinstalling by screwing them down to 18 Nm (13 lb-ft). To install the condenser core begin by reversing the removal procedure while using new O-ring seals and add the correct amount of clean PAG oil to lubricate the refrigerant system. The refrigerant system needs evacuation along with leak testing and charging at the end of the installation process.