How to service and repair the A/C Hose from the condenser to the evaporator on 2006 Lincoln Mark LT?

The first step for condenser to evaporator line repair and service requires the recovery of all refrigerant compounds. The first action is to take out the PCM and its bracket by releasing the three bolts which secure the PCM bracket so you can remove the bracket after; reinstall the bracket at 10 Nm (89 lb-in). Begin by removing the evaporator inlet fitting where you should discard the O-ring tube seals and then disconnect the condenser outlet fitting and dispose its O-ring tube seal before hand tightening this fitting to 25 Nm (18 lb-ft). The condenser to evaporator line must be taken off the system before assembly when replacement of new O-ring seals and PAG oil application should occur. Evacuate then perform a leak detection function before charging the refrigerant system. The replacement of a new suction accumulator will be required only when physical signs show either compressor failure contamination or suction accumulator damage.

OEM 2006 Lincoln Mark LT A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Hoses found

View related parts
2006 Lincoln Mark LT A/C Hose Part Number: 7L3Z-19835-A
$43.57 MSRP: $69.18
You Save: $25.61 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Accumulator Tube Outlet; A/C Refrigerant Liquid Hose; A/C Orifice Tube; A/C Hoses; A/C Tube; Tube
- Manufacturer Note: Condenser To Evaporator
- Replaces: 6L3Z-19835-E
- Base No.: 19835
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 12.4 x 29.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-19835-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Mark LT Manifold Tube Part Number: 4L3Z-19D850-AA
$101.66 MSRP: $167.27
You Save: $65.61 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Suction & Liquid Hose Assembly.; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Base No.: 19D850
- Item Weight: 5.00 Pounds
- Item Dimensions: 24.7 x 4.4 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-19D850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Mark LT A/C Hoses Part Number: 6L3Z-19D850-AA
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Base No.: 19D850
- Item Weight: 6.90 Pounds
- Item Dimensions: 39.2 x 15.5 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-19D850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2006 Lincoln Mark LT A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Mark LT A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Mark LT A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Mark LT A/C Hose Parts Q&A

Q: How to service and repair the A/C Hose from the condenser to the evaporator on 2006 Lincoln Mark LT?
A: The first step for condenser to evaporator line repair and service requires the recovery of all refrigerant compounds. The first action is to take out the PCM and its bracket by releasing the three bolts which secure the PCM bracket so you can remove the bracket after; reinstall the bracket at 10 Nm (89 lb-in). Begin by removing the evaporator inlet fitting where you should discard the O-ring tube seals and then disconnect the condenser outlet fitting and dispose its O-ring tube seal before hand tightening this fitting to 25 Nm (18 lb-ft). The condenser to evaporator line must be taken off the system before assembly when replacement of new O-ring seals and PAG oil application should occur. Evacuate then perform a leak detection function before charging the refrigerant system. The replacement of a new suction accumulator will be required only when physical signs show either compressor failure contamination or suction accumulator damage.