How to Service and Repair a 6-Way Power Seat Switch Safely on 2006 Lincoln Navigator?

Service of the 6-way power seat switch begins with moving the seat to enable access to all floor-mounted fasteners. The supplemental restraint system requires depowering because the air bag warning lamp will come on during RCM fuse removal when the ignition is turned on yet this is normal and does not signal any fault. The vehicle requires complete system status clearance and no evident faults before its delivery to the customer. The removal of the 40 percent seat begins with disconnecting its electrical connector which controls the 6-way power seat switch located beneath the seat. To start proceed with the recliner handle by removing the screw cover and screw followed by gentle pulling of the lumbar knob from both sides while being cautious to avoid damaging the components. When removing the screw from the seat cushion side shield at the base of the lumbar knob users should avoid scratching the side shield while getting the power seat switch knob loose. The front cushion side shield screw must be removed first before pulling on both center and rear retainers to free the cushion side shield from its position. Remove the two screws from the 6-way seat control switch before taking the switch out of the cushion side shield. The installation is complete by reversing the removal procedure and replacing the 40 percent seat along with activating SRS power. Safety glasses should be worn during work on air bag and safety belt pretensioner vehicles to minimize the chance of injury and never use memory saver accessories.

OEM 2006 Lincoln Navigator Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Seat Switches found

View related parts
2006 Lincoln Navigator Switch Assembly, Passenger Side
Part Number: 2L1Z-14C715-ABC
$46.60 MSRP: $66.67
You Save: $20.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Switch - Third Row Power Folding Seat
- Position: Passenger Side
- Base No.: 14C715A
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 3.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14C715-ABC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Switch Assembly, Passenger Side
Part Number: 2L1Z-14C715-AAC
$29.38 MSRP: $41.67
You Save: $12.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Seat Switch; Seat Switch
- Manufacturer Note: Switch - Third Row Power Folding Seat
- Position: Passenger Side
- Base No.: 14C715
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.6 x 2.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14C715-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Switch Assembly, Driver Side
Part Number: 2L7Z-14A701-AB
$57.25 MSRP: $90.91
You Save: $33.66 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Seat Switch; Switch
- Position: Driver Side
- Base No.: 14A701
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.8 x 3.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14A701-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Seat Switch, Passenger Side
Part Number: 2L7Z-14A701-AA
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch; Switch
- Position: Passenger Side
- Base No.: 14A701
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14A701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Switch, Passenger Side
Part Number: 2L7Z-14D695-ACA
Product Specifications
- Other Name: Switch Assembly; Seat Heater Switch
- Position: Passenger Side
- Base No.: 14D694A
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14D695-ACA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Switch, Driver Side
Part Number: 2L7Z-14D694-ACA
Product Specifications
- Other Name: Switch Assembly; Seat Heater Switch
- Position: Driver Side
- Base No.: 14D694B
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14D694-ACA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Switch
Part Number: 2L7Z-14C715-AAD
Product Specifications
- Other Name: Switch Assembly - Seat Back; Power Seat Switch; Switch Assembly - Seat Back Adjuster
- Manufacturer Note: (-D*)
- Base No.: 14C715
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.8 x 3.2 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14C715-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2006 Lincoln Navigator Seat Switch
Part Number: 2L7Z-14776-AAB
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch; Memory Switch
- Manufacturer Note: Satin Nickel
- Base No.: 14776
- Item Weight: 0.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-14776-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2006 Lincoln Navigator Seat Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Navigator Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Navigator Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Navigator Seat Switch Parts Questions & Experts Answers

Q: How to Service and Repair a 6-Way Power Seat Switch Safely on 2006 Lincoln Navigator?
A: Service of the 6-way power seat switch begins with moving the seat to enable access to all floor-mounted fasteners. The supplemental restraint system requires depowering because the air bag warning lamp will come on during RCM fuse removal when the ignition is turned on yet this is normal and does not signal any fault. The vehicle requires complete system status clearance and no evident faults before its delivery to the customer. The removal of the 40 percent seat begins with disconnecting its electrical connector which controls the 6-way power seat switch located beneath the seat. To start proceed with the recliner handle by removing the screw cover and screw followed by gentle pulling of the lumbar knob from both sides while being cautious to avoid damaging the components. When removing the screw from the seat cushion side shield at the base of the lumbar knob users should avoid scratching the side shield while getting the power seat switch knob loose. The front cushion side shield screw must be removed first before pulling on both center and rear retainers to free the cushion side shield from its position. Remove the two screws from the 6-way seat control switch before taking the switch out of the cushion side shield. The installation is complete by reversing the removal procedure and replacing the 40 percent seat along with activating SRS power. Safety glasses should be worn during work on air bag and safety belt pretensioner vehicles to minimize the chance of injury and never use memory saver accessories.