FordParts
My Garage
My Account
Cart
OEM 2007 Ford Expedition Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Water Pump found
2007 Ford Expedition Water Pump Part Number: 4C3Z-8501-B
$131.50 MSRP: $216.36You Save: $84.86 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 4C3Z-8501-D
- Replaces: PW-461, YC3Z-8501-AB, 7L3Z-8501-A, YC3Z-8501-AA
- Base No.: 8501
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Expedition Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Expedition Water Pump Parts Q&A
- Q: How to Service and Repair the Water Pump on 2007 Ford Expedition?A: Start the coolant pump servicing process by removing all fluid from the engine cooling system. After fan removal tighten the four coolant pump pulley bolts to 25 Nm before reattaching them according to the torque specification. The clockwise rotation of the belt tensioner lets the accessory drive belt disconnect from the coolant pump pulley before removing the four coolant pump pulley bolts to detach the pulley. Take out the coolant pump using its four holding bolts and set aside the O-ring seal. Forward the removal steps after inspecting the mating surfaces by cleaning them properly with metal surface prep according to the packaging directions. Place a brand new O-ring seal on the installation site while having applied clean engine coolant for its lubrication. Never tighten the coolant pump beyond 25 Nm (18 ft. lbs.) during the installation phase.