How is the Rear Crossmember Serviced on 2007 Ford F-150?

The repair of the rear cross-member begins when you put the vehicle onto a hoist while setting the transmission gear to neutral. The exhaust hanger bolts need removal while also ensuring a 40 Nm (30 lb-ft) torque on these bolts when reinstalling. After removing the two heat shield screws service technicians should tighten them to 20 Nm (15 lb-ft) prior to replacement. A suitable jack must sustain the transmission before removing the two support nuts that require a torque specification of 76 lb-ft (103 Nm). The four transmission support crossmember bolts must be removed while you should torque them to 115 Nm (85 lb-ft) before reinstalling. Finish the project by putting back the transmission support crossmember while following the reverse steps of removal.

OEM 2007 Ford F-150 Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rear Crossmembers found

View related parts
2007 Ford F-150 Rear Crossmember Part Number: 9L3Z-15107A94-A
$74.42 MSRP: $102.95
You Save: $28.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly - Rear Seat; Floor Pan Crossmember, Rear; Crossmember
- Position: Rear
- Replaces: 5L3Z-15107A94-AA, 5L3Z-15107A94-B, 8L3Z-15107A94-A
- Base No.: <107A94
- Item Weight: 13.30 Pounds
- Item Dimensions: 71.4 x 7.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-15107A94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Ford F-150 Rear Crossmember Part Number: 9L3Z-18107A94-A
$171.91 MSRP: $265.30
You Save: $93.39 (36%)
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly - Rear Seat; Floor Pan Crossmember, Rear; Crossmember
- Position: Rear
- Replaces: 5L3Z-18107A94-AA, 8L3Z-18107A94-A
- Base No.: <107A94
- Item Weight: 12.30 Pounds
- Item Dimensions: 70.1 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-18107A94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS

2007 Ford F-150 Rear Crossmember

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-150 Rear Crossmember available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-150 Rear Crossmember as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-150 Rear Crossmember Parts Q&A

Q: How is the Rear Crossmember Serviced on 2007 Ford F-150?
A: The repair of the rear cross-member begins when you put the vehicle onto a hoist while setting the transmission gear to neutral. The exhaust hanger bolts need removal while also ensuring a 40 Nm (30 lb-ft) torque on these bolts when reinstalling. After removing the two heat shield screws service technicians should tighten them to 20 Nm (15 lb-ft) prior to replacement. A suitable jack must sustain the transmission before removing the two support nuts that require a torque specification of 76 lb-ft (103 Nm). The four transmission support crossmember bolts must be removed while you should torque them to 115 Nm (85 lb-ft) before reinstalling. Finish the project by putting back the transmission support crossmember while following the reverse steps of removal.