FordParts
My Garage
My Account
Cart
OEM 2007 Ford Freestar Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Manifolds found
2007 Ford Freestar Intake Manifold, Upper Part Number: 7L3Z-9424-D
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper; Intake Plenum
- Position: Upper
- Replaces: 5L3Z-9424-B
- Base No.: 9424A
- Item Weight: 17.60 Pounds
- Item Dimensions: 17.5 x 16.0 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-9424-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestar Intake Manifold Part Number: 6F2Z-9424-B
Product Specifications- Other Name: Manifold Assembly - Inlet
- Replaces: 3F2Z-9424-BA, 6F2Z-9424-AA
- Base No.: 9424A
- Item Weight: 18.00 Pounds
- Item Dimensions: 8.1 x 12.0 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-9424-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestar Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Freestar Intake Manifold Parts Q&A
- Q: How to service the lower intake manifold on 2007 Ford Freestar?A: The first step when servicing the lower intake manifold is to maintain cleanliness because any foreign objects entering vehicle passages could produce engine failure. The first step involves taking away both the fuel rail alongside the coolant bypass tube. You should disconnect the two heater hoses with the upper radiator hose from the lower intake manifold while removing the intake manifold runner control (IMRC) electrical connector. Write down all positions for the eight small bolts and six large bolts before unfastening them. The removal of the lower intake manifold requires discarding both gaskets and seals from right-hand and left-hand along with front and rear positions. Use a metal surface cleaner to clean all gasket sealing areas before installing new front and rear seals with silicone gasket and sealer in their mounting points. When installing new intake manifold gaskets consumers must check the lower intake manifold positioning not longer than four minutes after applying the sealant. Use silicone gasket and sealer at the lower intake manifold mounting points before installing the bolts in the specified short and long sequences. Follow the specified order to install the bolts by tightening them first to 5 Nm (44 inch lbs) and then to 10 Nm (89 inch lbs). After installing the fuel rail and coolant bypass tube owners should reconnect the IMRC electrical connector and upper radiator hose and install the two heater hoses before restoration of the system. Remove engine oil while draining it from the system and apply engine oil to the new filter seal. After the gasket contacts the housing, apply one-half turn when tightening the filter. After completing oil supply fill the engine unit with fresh engine oil.