FordParts
My Garage
My Account
Cart
OEM 2007 Ford Fusion Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Starters found
2007 Ford Fusion Starter Part Number: 8E5Z-11002-C
$202.77 MSRP: $323.64You Save: $120.87 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Starter Motor Assembly; Starter Motor
- Replaces: SA-950, 6E5Z-11002-AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-11002-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Starter Part Number: 8E5Z-11002-B
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor
- Replaces: 6E5Z-11002-BA, SA-951
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-11002-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Starter Part Number: 6E5Z-11002-BA
Product Specifications- Other Name: Starter Motor Assembly; Reman Starter Motor; Starter Motor Reman; Reman Starter; Starters; Starter Motor
- Replaced by: 8E5Z-11002-B
- Base No.: 11002
- Item Weight: 10.30 Pounds
- Item Dimensions: 8.1 x 8.5 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-11002-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Fusion Starter Parts Q&A
- Q: How to service and repair the starter motor on 2007 Ford Fusion?A: Begin the starter motor service operation by taking out the battery tray. The starter motor solenoid wire requires a wire nut removal before the wire gets placed safely aside. Reassemble the wire after service with 5 Nm (44 lb-in) torque specification. Set the starter motor solenoid terminal battery cable cover to the side and take out the battery cable nut before setting the cable out of the way for reinstallation with a torque of 12 Nm (9 lb-ft). Tighten the two starter motor bolts to 27 Nm (20 lb-ft) after removing the starter motor for reinstalling because this completes the maintenance procedure. After maintenance the installation should end by executing the reverse removal steps while verifying protective caps remain in position until all work is finished.