FordParts
My Garage
My Account
Cart
OEM 2007 Ford Mustang Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Catalytic Converters found
2007 Ford Mustang Catalytic Converter
Part Number: AR3Z-5F250-AProduct Specifications- Other Name: Converter Assembly; Exhaust Pipe; Converter & Pipe; Converter
- Replaces: 8R3Z-5F250-D, 7R3Z-5F250-A, 9R3Z-5F250-A
- Base No.: 5F250
- Item Weight: 31.10 Pounds
- Item Dimensions: 62.4 x 36.4 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AR3Z-5F250-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Catalytic Converter
Part Number: 8R3Z-5F250-EProduct Specifications- Other Name: Converter Assembly; Converter
- Replaces: 4R3Z-5F250-KB, 6R3Z-5F250-F, 6R3Z-5F250-C, 8R3Z-5F250-B, 7R3Z-5F250-F, 6R3Z-5F250-LA, 6R3Z-5F250-E, 6R3Z-5F250-MA, 6R3Z-5F250-D, 7R3Z-5F250-E, 8R3Z-5F250-C
- Base No.: 5F250
- Item Weight: 31.20 Pounds
- Item Dimensions: 54.6 x 27.3 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-5F250-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Catalytic Converter
Part Number: 4R3Z-5F250-CProduct Specifications- Other Name: Converter Assembly; Converter
- Replaces: 4R3Z-5F250-GB
- Base No.: 5F250
- Item Dimensions: 15.0 x 10.6 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-5F250-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Catalytic Converter
Part Number: 7R3Z-5F250-GProduct Specifications- Other Name: Converter Assembly; Converter
- Base No.: 5F250
- Item Weight: 33.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-5F250-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Mustang Catalytic Converter Parts Questions & Experts Answers
- Q: How to service the catalytic converter on a 4.0L engine on 2007 Ford Mustang?A: You should start the 4.0L catalytic converter service by first placing the car into NEUTRAL mode before hoisting it and then standing up the muffler with a jackstand. You should disconnect the intermediate pipe from the catalytic converter assembly by removing the exhaust coupler then disposing it. All heated oxygen sensors (HO2S) must be disconnected along with catalyst monitor sensors from their wiring connectors before any repair work starts to prevent damage. First remove right-hand HO2S electroical connectors then disconnect left-hand HO2S electrical connectors followed by right-hand and left-hand catalyst monitor sensor electrical connectors. Tighten all hand-bolted catalytic converter nuts before taking off and discarding the two RH catalytic converter-to-exhaust manifold nuts. Install the new nuts by torquing them to 45 Nm (33 ft. lbs.) at 10 Nm (89 inch lbs.) intervals with the first application on the upper nut. Perform the same procedure on the two LH catalytic converter-to-exhaust manifold nuts. Avoid damaging the manifold outlet or converter inlet flares and their feeding studs when you uninstall the catalytic converter assembly. The mating surfaces of the manifold outlet flare and catalytic converter inlet flare and muffler inlet pipe need cleaning with Scotch Brite pad while preventing foreign materials from accessing the catalytic converters. To secure the positioning of the catalytic converter a jackstand should be used behind the outlet. The manifold studs should align with the pipe flange while hanger rods must be centered in the isolators. After finishing the installation follow the removal steps while using new converter-to-manifold nuts along with an exhaust coupler.
Related 2007 Ford Mustang Parts
2007 Ford Mustang EGR Valve
2007 Ford Mustang Exhaust Hanger
2007 Ford Mustang Exhaust Manifold
2007 Ford Mustang Muffler
2007 Ford Mustang Canister Purge Valve
2007 Ford Mustang EGR Tube
2007 Ford Mustang EGR Valve Gasket
2007 Ford Mustang Exhaust Manifold Clamp
2007 Ford Mustang Exhaust Manifold Gasket
2007 Ford Mustang Exhaust Pipe
2007 Ford Mustang Muffler Hanger Straps
2007 Ford Mustang Vapor Canister