FordParts
My Garage
My Account
Cart
OEM 2007 Ford Mustang EGR Tube
EGR Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Tubes found
2007 Ford Mustang Connector Pipe Part Number: 5R3Z-9E470-DA
Product Specifications- Other Name: Tube - Connecting; Exhaust Gas Recirculation (EGR) Tube
- Base No.: 9E470
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E470-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Tube Assembly Part Number: 5R3Z-9E469-GA
Product Specifications- Other Name: Tube - EGR Valve To Exhaust Manifold; Exhaust Gas Recirculation (EGR) Tube; EGR Tube; Tube
- Replaces: 5R3Z-9E469-FA
- Base No.: 9E469
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.0 x 11.2 x 36.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E469-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang EGR Tube
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang EGR Tube available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang EGR Tube as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Mustang EGR Tube Parts Q&A
- Q: How to service and repair the EGR Tube on a 5.4L 4V engine on 2007 Ford Mustang?A: Service and repair the Exhaust Gas Recirculation (EGR) system module tube requires users to start by removing the battery tray on vehicles with a 5.4L 4V engine. The EGR system module tube requires removal of its upper fitting from the module-to-exhaust tube connection where a torque value of 42 Nm (31 lb-ft) must be applied before reinstalling. After disconnecting the lower fitting for the EGR system module tube-to-exhaust manifold tube you should remove the tube by tightening it to 42 Nm (31 lb-ft). The installation of upper and lower fittings on 4.6L 3V engine vehicles requires a torque setting of 39 Nm (29 lb-ft). The installation ends by performing the reverse steps of removal.