FordParts
My Garage
My Account
Cart
OEM 2007 Ford Mustang Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Canister Purge Valves found
2007 Ford Mustang Solenoid Valve Part Number: 6R3Z-9F945-AA
$57.11 MSRP: $83.13You Save: $26.02 (32%)Product Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid
- Replaces: 5U5Z-9F945-AA
- Base No.: 9F945
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.8 x 4.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Purge Valve Part Number: 7U5Z-9C915-F
$82.33 MSRP: $130.73You Save: $48.40 (38%)Product Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Purge Control Valve
- Base No.: 9C915
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.1 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U5Z-9C915-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Purge Valve Part Number: 4R3Z-9C915-AA
$88.07 MSRP: $144.91You Save: $56.84 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Purge Control Valve
- Base No.: 9C915A
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 4.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-9C915-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Mustang Canister Purge Valve Parts Q&A
- Q: How to service the evaporative emission canister purge valve on 2007 Ford Mustang?A: Start the service of the evaporative emission canister purge valve by disconnecting the battery ground cable because fuel vapor can cause explosions or fires. You should disconnect the electrical connector that runs to the EVAP canister purge valve. When working with the upper vapor tube, either replace or remove it properly by connecting its identification-tagged end to the upper EVAP canister purge valve port. People must disconnect vapor tube quick connect couplings from the EVAP canister purge valve port before using the release tab to unmount the valve from its bracket. Executing new valve installation requires following the reverse order of removal procedure. Post-installation requires a leak check on the evaporative emission system followed by completion of the evaporative emission repair verification drive cycle.