How to bleed the brake system after disconnecting the disc brake caliper on 2007 Ford Ranger?

The brake bleeding process begins with placing a box-end wrench on the disc brake caliper bleeder screw followed by attaching a rubber drain tube to it that should go under clean specified brake fluid. An assistant should both pump the brake pedal while keeping it under constant pressure. After brake fluid appears through the brake caliper bleeder screw slow down its rotation while the helper continues to push the brake pedal. Use the described procedure repeatedly until fluid remains transparent and free of bubbles. The braking operation ends by filling the master cylinder reservoir when necessary and by securing the disc brake caliper bleeder screw to 15 Nm (11 ft. lbs).

OEM 2007 Ford Ranger Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Calipers found

View related parts
2007 Ford Ranger Caliper, Front Driver Side Part Number: 6L5Z-2B121-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Replaces: 1L2Z-2B121-AC, 3L2Z-2B121-BB
- Base No.: 2B120
- Item Weight: 8.90 Pounds
- Item Dimensions: 9.9 x 7.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Caliper, Front Part Number: 6L5Z-2B120-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front
- Replaces: 1L2Z-2B120-AB, 3L2Z-2B120-BB
- Base No.: 2B120
- Item Weight: 9.30 Pounds
- Item Dimensions: 5.6 x 7.5 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2007 Ford Ranger Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Brake Caliper Parts Q&A

Q: How to bleed the brake system after disconnecting the disc brake caliper on 2007 Ford Ranger?
A: The brake bleeding process begins with placing a box-end wrench on the disc brake caliper bleeder screw followed by attaching a rubber drain tube to it that should go under clean specified brake fluid. An assistant should both pump the brake pedal while keeping it under constant pressure. After brake fluid appears through the brake caliper bleeder screw slow down its rotation while the helper continues to push the brake pedal. Use the described procedure repeatedly until fluid remains transparent and free of bubbles. The braking operation ends by filling the master cylinder reservoir when necessary and by securing the disc brake caliper bleeder screw to 15 Nm (11 ft. lbs).