My Garage
Cart

OEM 2008 Ford Ranger Brake Caliper

Caliper
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Calipers found

  • 2008 Ford Ranger Brake Caliper - 6L5Z-2B121-A
    2008 Ford Ranger Brake Caliper Diagram - 6L5Z-2B121-A
    View related parts
    Product Specifications
    • Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
    • Position: Front Driver Side
    • Replaces: 1L2Z-2B121-AC, 3L2Z-2B121-BB
    • Base No.: 2B120
    • Item Weight: 8.90 Pounds
    • Item Dimensions: 9.9 x 7.4 x 5.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L5Z-2B121-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Ranger Submodels:
    • Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
  • 2008 Ford Ranger Brake Caliper - 6L5Z-2B120-A
    2008 Ford Ranger Brake Caliper Diagram - 6L5Z-2B120-A
    View related parts
    Product Specifications
    • Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
    • Position: Front
    • Replaces: 1L2Z-2B120-AB, 3L2Z-2B120-BB
    • Base No.: 2B120
    • Item Weight: 9.30 Pounds
    • Item Dimensions: 5.6 x 7.5 x 10.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L5Z-2B120-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Ranger Submodels:
    • Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Brake Caliper Parts Questions & Experts Answers

  • Q: How to service and repair the front brake caliper on 2008 Ford Ranger?
    A: The first step for repairing front brake calipers begins by taking off the wheel along with matching tire. The service requires removal of the brake caliper flow bolt then placement of the brake hose aside while discarding the two copper washers and adding a new plug to prevent fluid loss. Do not probe the caliper sight hole when retracting pistons because damaging pistons or their boots might occur. Unfasten the two guide pin bolts from the brake caliper and detach it from the vehicle. If damage or leakage occurs in the boot area, swap out the disc brake caliper. Installation can begin by tightening the bottom caliper bolt first followed by the top bolt since doing this first will protect guide pins from damage while checking that caliper pin boots are fully seated. Install the two guide pin bolts into the position before tightening them to 36 Nm (27 lb-ft). Install two new copper washers after which you can install the brake caliper flow bolt and tighten it to 34 Nm (25 lb-ft). Complete brake caliper bleeding before reinstalling the wheel along with its tire. Conclude the brake system testing by performing normal functionality checks and applying the brakes multiple times for proper operation verification.

Related 2008 Ford Ranger Parts