How to Service the MAP Sensor on 2007 Ford Ranger?

Service of the manifold absolute pressure (MAP) sensor requires disconnecting the battery ground cable while also detaching its electrical connector. Start by removing the bolt which holds the MAP sensor in place then lift the sensor out of its position in the intake manifold while discarding the O-ring seal present. The installation should start by performing the reversal of removal steps while using a fresh O-ring seal.

OEM 2007 Ford Ranger MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Ford Ranger M.A.P. Sensor
Part Number: 1S7Z-9F479-AD
$73.26 MSRP: $120.55
You Save: $47.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Manifold Absolute Pressure Sensor; Manifold Sensor; Map Sensor; Sensor; Pressure Sensor
- Replaces: 1S7Z-9F479-AA, 4S4Z-9F479-AA, CX-1976, 1S7Z-9F479-AC, CX-2559
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-9F479-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS

2007 Ford Ranger MAP Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger MAP Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger MAP Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger MAP Sensor Parts Questions & Experts Answers

Q: How to Service the MAP Sensor on 2007 Ford Ranger?
A: Service of the manifold absolute pressure (MAP) sensor requires disconnecting the battery ground cable while also detaching its electrical connector. Start by removing the bolt which holds the MAP sensor in place then lift the sensor out of its position in the intake manifold while discarding the O-ring seal present. The installation should start by performing the reversal of removal steps while using a fresh O-ring seal.