How to service and repair the ignition coil on 2007 Ford Ranger?

You must detach spark plug wires by twisting them softly before upward extraction so you can keep the wire connector bonds inside the boots continuous. Start the process by disconnecting the ignition coil electrical connector then remove its four securing bolts. During reinstallation phase you must tighten bolts to 6 Nm (53 lb-in). Remove all cleaning soap from coil towers by applying compressed air after cleaning them with soap and water solution using a dampened cloth. Examine the towers to check for any existence of cracks, carbon tracks or accumulated dirt. Silicone dielectric compound needs to be applied to the spark plug wire boots interior after cleaning before the reinstall process starts.

OEM 2007 Ford Ranger Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
2007 Ford Ranger Ignition Coil
Part Number: 5F2Z-12029-AD
$79.89 MSRP: $131.45
You Save: $51.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Direct Ignition Coil; Coil
- Replaces: 1F2Z-12029-AC
- Base No.: 12029
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.5 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-12029-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Ranger Ignition Coil
Part Number: 1S7Z-12029-AD
$66.74 MSRP: $109.82
You Save: $43.08 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil
- Replaces: 1S7Z-12029-AA
- Base No.: 12029
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.4 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-12029-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2007 Ford Ranger Ignition Coil
Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Custom, Edge, FX4, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS

2007 Ford Ranger Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Ignition Coil Parts Questions & Experts Answers

Q: How to service and repair the ignition coil on 2007 Ford Ranger?
A: You must detach spark plug wires by twisting them softly before upward extraction so you can keep the wire connector bonds inside the boots continuous. Start the process by disconnecting the ignition coil electrical connector then remove its four securing bolts. During reinstallation phase you must tighten bolts to 6 Nm (53 lb-in). Remove all cleaning soap from coil towers by applying compressed air after cleaning them with soap and water solution using a dampened cloth. Examine the towers to check for any existence of cracks, carbon tracks or accumulated dirt. Silicone dielectric compound needs to be applied to the spark plug wire boots interior after cleaning before the reinstall process starts.