How to remove and replace the wheel cylinder while ensuring safety and proper function on 2007 Ford Ranger?

The wheel cylinder replacement process requires drivers to use DOT 3-approved motor vehicle brake fluid while noting that other fluids will cause permanent brake damage which can lead to operational failure and personal injuries. Before proceeding check all cautions on the product label while also consulting the MSDS document for additional details. For Ford/Motorcraft product medical emergencies dial 1-800-959-3673. You need to protect painted and plastic surfaces because brake fluid poses harm to them so immediately clean them with water when liquid escapes. Start the brake job by taking out the brake shoes and linings followed by disconnecting the brake tube-to-wheel cylinder fitting until it reaches 18 Nm torque. Reinstall the fitting with the same torque value. Remove the wheel cylinder while tightening its two bolts to 15 Nm (11 ft. lbs) before installing it into position. The brake system must be bled during the reverse removal methods to verify proper operation.

OEM 2007 Ford Ranger Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Cylinders found

View related parts
2007 Ford Ranger Caliper, Front
Part Number: 6L5Z-2B120-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front
- Replaces: 1L2Z-2B120-AB, 3L2Z-2B120-BB
- Base No.: 2B120
- Item Weight: 9.30 Pounds
- Item Dimensions: 5.6 x 7.5 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Wheel Cylinder, Rear
Part Number: 3L5Z-2262-DB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Position: Rear
- Replaces: 2L5Z-2262-DB, 3L5Z-2262-DA, 2L5Z-2262-DA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 2.0 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L5Z-2262-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Wheel Cylinder, Rear
Part Number: 2L5Z-2262-CB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Replaces: 2L5Z-2262-CA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L5Z-2262-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2007 Ford Ranger Wheel Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Wheel Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Wheel Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Wheel Cylinder Parts Questions & Experts Answers

Q: How to remove and replace the wheel cylinder while ensuring safety and proper function on 2007 Ford Ranger?
A: The wheel cylinder replacement process requires drivers to use DOT 3-approved motor vehicle brake fluid while noting that other fluids will cause permanent brake damage which can lead to operational failure and personal injuries. Before proceeding check all cautions on the product label while also consulting the MSDS document for additional details. For Ford/Motorcraft product medical emergencies dial 1-800-959-3673. You need to protect painted and plastic surfaces because brake fluid poses harm to them so immediately clean them with water when liquid escapes. Start the brake job by taking out the brake shoes and linings followed by disconnecting the brake tube-to-wheel cylinder fitting until it reaches 18 Nm torque. Reinstall the fitting with the same torque value. Remove the wheel cylinder while tightening its two bolts to 15 Nm (11 ft. lbs) before installing it into position. The brake system must be bled during the reverse removal methods to verify proper operation.