OEM 2007 Lincoln Town Car Automatic Transmission Filter

2007 Lincoln Town Car Automatic Transmission Filter Parts Questions & Experts Answers

• Q: How to Service and Repair the Automatic Transmission Filter on 2007 Lincoln Town Car?

  A: Service work on the filter of automatic transmission starts with placing the vehicle in NEUTRAL position and hanging it from a hoist. You should drain the transmission fluid with the help of transmission fluid pan bolt loosening followed by complete fluid drainage after which the bolts can be removed. Detach the transmission fluid filter along with its seal by pulling down evenly after you eliminate the transmission fluid pan and gasket. Check the condition of the transmission fluid pan together with its gasket along with magnet. The main control bore requires a small screwdriver to remove any seal residue prior to installation when using a new filter while being cautious of bore damage. A new filter and seal must be installed when the failure type is contamination-related but the filter can be reused when no major contamination is detected during inspection. Put the pan magnet into the fluid pan while installing a new fluid filter and seal and then place the clean transmission fluid pan gasket which was checked for damage. Securely install the transmission fluid pan along with its gasket while torquing bolts to 14 Nm (10 ft. lbs). The transmission needs 4.7L (5 qt) of new automatic transmission fluid that should be added until it reaches its proper fluid level.