How to remove and replace the recirculation blend door actuator on 2007 Mercury Mariner?

The instrument panel must be removed first before starting the replacement of the recirculation blend door actuator. The first action is to detach the vacuum supply hose from the recirculation vacuum control motor. First disconnect the vacuum supply hose from the recirculation vacuum control motor and after that remove the two screws which secure the motor. Use rotation of the vacuum control motor to get past the retaining arm before you take it out. Apply the opposite steps to install the actuator which were used during its removal process.

OEM 2007 Mercury Mariner Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2007 Mercury Mariner Motor
Part Number: 8L8Z-19E616-E
$27.09 MSRP: $43.02
You Save: $15.93 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator
- Manufacturer Note: Pin #5 Is Not Used (No Connection)
- Replaced by: AL8Z-19E616-F
- Base No.: 19E616
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 6.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-19E616-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mariner Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

2007 Mercury Mariner Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mariner Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mariner Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Mariner Blend Door Actuator Parts Questions & Experts Answers

Q: How to remove and replace the recirculation blend door actuator on 2007 Mercury Mariner?
A: The instrument panel must be removed first before starting the replacement of the recirculation blend door actuator. The first action is to detach the vacuum supply hose from the recirculation vacuum control motor. First disconnect the vacuum supply hose from the recirculation vacuum control motor and after that remove the two screws which secure the motor. Use rotation of the vacuum control motor to get past the retaining arm before you take it out. Apply the opposite steps to install the actuator which were used during its removal process.