FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Mariner Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Bumpers found
2007 Mercury Mariner Reinforcement, Front
Part Number: 9L8Z-17757-A$93.79 MSRP: $115.47You Save: $21.68 (19%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mariner Bumper Cover
Part Number: 5E6Z-17D957-ABPTM$372.53 MSRP: $547.03You Save: $174.50 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover
- Base No.: 17D957
- Item Weight: 11.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5E6Z-17D957-ABPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mariner Bumper Cover
Part Number: 5E6Z-17K835-ABPTMProduct Specifications- Other Name: Cover
- Base No.: 17K835
- Item Weight: 86.40 Pounds
- Item Dimensions: 89.0 x 44.5 x 33.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5E6Z-17K835-ABPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mariner Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mariner Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mariner Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Mariner Bumper Parts Questions & Experts Answers
- Q: How to service and repair the front bumper cover on 2007 Mercury Mariner?A: Service and repair of the front bumper cover starts by applying tape at its corners and under the headlamps to protect paint surfaces. A hoist should receive the vehicle while it remains in NEUTRAL position. The service process starts by taking out the 6 pin-type retainers that contain 3 components each side and continues with the fender splash shield bolts which need 2 bolts per side while reinstallation requires tightening these bolts to 8 Nm (71 lb-in). The following task requires the removal of the four air deflector bolts before tightening them to 8 Nm (71 lb-in) when reinstalling. Then remove the 2 pin-type retainers located at the center of the front bumper cover and the 2 outer ones positioned on each side. DisableView fog lamps by taking off electrical connectors when present on the vehicle. The 2 upper bumper cover securing bolts need removal and subsequent installation with 8 Nm of torque (71 lb-in). The configuration of the front bumper cover installation requires placing the front bumper forward before applying medial pressure at the headlamp base to latch it into position on the bumper slides.
Related 2007 Mercury Mariner Parts
2007 Mercury Mariner Car Mirror
2007 Mercury Mariner Cigarette Lighter
2007 Mercury Mariner Door Lock
2007 Mercury Mariner Door Seal
2007 Mercury Mariner Front Door Striker
2007 Mercury Mariner Fuel Door
2007 Mercury Mariner License Plate
2007 Mercury Mariner Seat Cover
2007 Mercury Mariner Spoiler
2007 Mercury Mariner Wheelhouse
2007 Mercury Mariner Windshield Wiper
2007 Mercury Mariner Wiper Blade