OEM 2008 Ford Crown Victoria Vapor Canister

2008 Ford Crown Victoria Vapor Canister Parts Questions & Experts Answers

• Q: How to Service the Vapor Canister on 2008 Ford Crown Victoria?

  A: The servicing process for evaporative emission control canister requires deploying the fire suppression system to the deactive state to prevent personal injuries. Park the vehicle at NEUTRAL position on a hoist. Drill holes into the centers of the three EVAP canister rivets to prepare their removal since new rivets will be installed. First disconnect the evaporative emission (EVAP) canister vent solenoid electrical connector. The service begins with disconnecting both the dust separator vent tube and fuel vapor tube assembly from the EVAP canister vapor tube quick connect coupling. Tighten new EVAP canister installations to 6 Nm because after removing the two securing nuts and retrieving the canister. Vehicle occupants must turn off and deactivate a fire suppression system before performing the installation and then repower it after completing the process. Perform the Evaporative Emission System Leak Test together with the evaporative emission repair verification drive cycle to finish this service.