OEM 2007 Ford Crown Victoria Vapor Canister

2007 Ford Crown Victoria Vapor Canister Parts Questions & Experts Answers

• Q: What Are the Critical Steps for Safe and Proper Installation of a Vapor Canister on 2007 Ford Crown Victoria?

  A: Several specified steps comprise the service procedures for evaporative emission control canisters to achieve proper installation while ensuring safety. First disconnect the battery ground cable before work to prevent electrical sparks that could start fuel vapors. Proceed to depower the fire suppression system when it exists on a vehicle. Position the vehicle on a hoist so that it faces NEUTRAL position. The service requires EVAP breather tube and EVAP vapor tube quick connect coupling to be removed from their original positions. Readjust the two EVAP canister retaining nuts to 6 Nm (53 lb-in) when reinstalling them. The original three rivets need removal by drilling out their central parts during the installation process of the new rivets after disconnecting the canister vent solenoid electrical connector. The necessary power-up of the vehicle's fire suppression system applies only when the EVAP canister removal takes place. Reverse the removal process then power up the fire suppression system when needed for leak testing and drive cycle execution of evaporative emission repair verification.