FordParts
My Garage
My Account
Cart
OEM 2008 Ford Crown Victoria Muffler
Exhaust Muffler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Mufflers found
Product Specifications- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BB
- Base No.: 5230
- Item Weight: 24.60 Pounds
- Item Dimensions: 92.7 x 17.5 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front; Exhaust Muffler, Right; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Passenger Side
- Base No.: 5230
- Item Weight: 24.40 Pounds
- Item Dimensions: 90.9 x 17.3 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front
- Position: Front Passenger Side
- Replaces: 6W7Z-5230-AA
- Base No.: 5230
- Item Weight: 22.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7W7Z-5230-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front
- Manufacturer Note: LH muffler with fire protection, FROM 8/3/2005
- Position: Front Driver Side
- Replaces: 5W7Z-5230-FB, 6W7Z-5230-AB
- Base No.: 5230
- Item Weight: 23.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BA
- Base No.: 5230
- Item Weight: 25.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
- Base No.: 5230
- Item Weight: 22.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Muffler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Crown Victoria Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Crown Victoria Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Crown Victoria Muffler Parts Q&A
- Q: How to Properly Service and Repair a Tail Pipe and Muffler on 2008 Ford Crown Victoria?A: Start service procedures on the muffler and tailpipe by putting the vehicle into neutral position on a hoist. Turn off power supply to the air suspension system to prevent unexpected pressure changes in air springs because such occurrences may cause shifting of the vehicle which could result in injuries to people. After removing the 2 nuts and the clamp discard them before torquing the new clamp to 48 Nm (35 ft. lbs.) when installing it. A suitable exhaust cutter should be used for disconnecting the muffler from the tailpipe. To ensure safety check the isolators for defects and replace them if necessary before removing the tailpipe by detaching its isolator. The process of checking and removing the isolators must be performed again for the muffler. New exhaust fasteners should be fitted before final tightening when working on complete installation. Draw the flanges together uniformly by following alternate fastener tightening according to specification before tightening the fasteners to 33 Nm (24 ft. lbs.).