FordParts
My Garage
My Account
Cart
OEM 2008 Ford Crown Victoria Tail Pipe
Exhaust Tail Pipe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Tail Pipes found
2008 Ford Crown Victoria Front Pipe Part Number: 4W7Z-5246-CA
$224.66 MSRP: $310.80You Save: $86.14 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Replaces: 3W7Z-5246-CA
- Base No.: 5246
- Item Weight: 9.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-5246-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Inlet Pipe Part Number: 4W7Z-5246-BA
Product Specifications- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-BA
- Base No.: 5246
- Item Weight: 20.90 Pounds
- Item Dimensions: 46.2 x 10.1 x 26.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-5246-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front
- Position: Front Passenger Side
- Replaces: 6W7Z-5230-AA
- Base No.: 5230
- Item Weight: 22.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7W7Z-5230-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Front
- Manufacturer Note: LH muffler with fire protection, FROM 8/3/2005
- Position: Front Driver Side
- Replaces: 5W7Z-5230-FB, 6W7Z-5230-AB
- Base No.: 5230
- Item Weight: 23.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
- Base No.: 5230
- Item Weight: 22.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Inlet Pipe Part Number: 4W7Z-5246-AA
Product Specifications- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-AA
- Base No.: 5246
- Item Weight: 11.00 Pounds
- Item Dimensions: 36.7 x 20.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-5246-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Tail Pipe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Crown Victoria Tail Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Crown Victoria Tail Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Crown Victoria Tail Pipe Parts Q&A
- Q: How to Service and Repair a Muffler and Tail Pipe with a Fire Suppression System on 2008 Ford Crown Victoria?A: Before servicing the muffler and tailpipe one must disable the fire suppression system to prevent severe injuries. Place the vehicle in neutral gear on the hoisting equipment. You should start by taking off the rear suspension lateral arms together with the rear coil springs. The installation process should include using 48 Nm (35 ft. lbs.) torque when tightening the 2 nuts and the clamp after removal. Thoroughly examine the isolator before conducting repairs for wear or damage and get a replacement if needed. Then detach it. You should detach the isolator by turning the muffler and tailpipe assembly counterclockwise around the rear axle. Workers should install new exhaust fasteners without early engagement until the entire assembly is in place before they alternate torque application to the specified parameters until reaching 33 Nm (24 ft. lbs.) final torque. Vehicle owners must activate a fire suppression system function after installation completion yet they must follow safety warning procedures for preventable serious personal injuries while doing so.