How to service the knock sensor (KS) on 2008 Ford E-150?

In order to service the knock sensor (KS), start with the removal of the intake manifold. Next, put off the KS electrical connector and remove the bolt attaching the KS. The installation of the new KS to be installed is completed by tightening the new KS to 25 Nm (18 lb-ft) and then reversing the steps of removal.

OEM 2008 Ford E-150 Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Ford E-150 Knock Sensor Part Number: XL3Z-12A699-AA
$36.93 MSRP: $57.64
You Save: $20.71 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-150 Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Knock Sensor Parts Q&A

Q: How to service the knock sensor (KS) on 2008 Ford E-150?
A: In order to service the knock sensor (KS), start with the removal of the intake manifold. Next, put off the KS electrical connector and remove the bolt attaching the KS. The installation of the new KS to be installed is completed by tightening the new KS to 25 Nm (18 lb-ft) and then reversing the steps of removal.