How to service and repair the Knock Sensor (KS) on Ford E-150?

The intake manifold removal procedure serves as a first step when servicing or fixing the Knock Sensor (KS). To begin service and repair of the Knock Sensor (KS) start by detaching its electrical connector while also removing the bolt fastening the KS to place. Fasten the new KS with a torque of 25 Nm (18 lb-ft) before executing the reverse removal steps for final installation.

OEM Ford E-150 Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
Ford E-150 Knock Sensor
Part Number: XL3Z-12A699-AA
$36.36 MSRP: $56.75
You Save: $20.39 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Knock Sensor
Part Number: XL3Z-12A699-CA
Product Specifications
- Other Name: Sensor - Engine Knock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS

Ford E-150 Knock Sensor

Welcome to our website where you can discover high-quality, genuine Ford E-150 Knock Sensor. We offer an extensive inventory of OEM Ford E-150 Knock Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-150 Knock Sensor Parts Questions & Experts Answers

Knock Sensor
XL3Z-12A699-AA
Q: How to service and repair the Knock Sensor (KS) on Ford E-150?
A: The Intake Manifold removal procedure serves as a first step when servicing or fixing the Knock Sensor (KS). To begin service and repair of the Knock Sensor (KS) start by detaching its electrical connector while also removing the bolt fastening the KS to place. Fasten the new KS with a torque of 25 Nm (18 lb-ft) before executing the reverse removal steps for final installation.