How to Service the Power Steering Reservoir on 2008 Ford Edge?

A suitable device for suction should be used to drain power steering fluid from the reservoir as a first step of servicing. Secondly, remove the two nuts on the power steering reservoir followed by lifting it off the studs. Reinstallation requires you to tighten the nuts to 8 Nm while using 71 lb-in as the unit of measurement. Disconnect the return hose from the reservoir first through releasing its clamp, then disconnect the power steering pump supply hose from the reservoir in a similar fashion. Following reservoir removal, its installation requires a reverse order of removal steps and then filling the power steering system with proper fluid.

OEM 2008 Ford Edge Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2008 Ford Edge Power Steering Pump Reservoir
Part Number: 7T4Z-3E764-A
Product Specifications
- Other Name: Reservoir Assembly; Power Steering Reservoir; Reservoir
- Base No.: 3E764
- Item Weight: 2.00 Pounds
- Item Dimensions: 8.5 x 8.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-3E764-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2008 Ford Edge Power Steering Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Power Steering Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Power Steering Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge Power Steering Reservoir Parts Questions & Experts Answers

Q: How to Service the Power Steering Reservoir on 2008 Ford Edge?
A: A suitable device for suction should be used to drain power steering fluid from the reservoir as a first step of servicing. Secondly, remove the two nuts on the power steering reservoir followed by lifting it off the studs. Reinstallation requires you to tighten the nuts to 8 Nm while using 71 lb-in as the unit of measurement. Disconnect the return hose from the reservoir first through releasing its clamp, then disconnect the power steering pump supply hose from the reservoir in a similar fashion. Following reservoir removal, its installation requires a reverse order of removal steps and then filling the power steering system with proper fluid.