How to service the blower motor resistor on 2008 Ford Escape?

The blower motor resistor can be serviced by first lowering the glove compartment and dislodging the electrical connector to it. Next, unscrew the two screws which clamped the resistor and have to be screwed in tight to 3 Nm (27 lb-in) when fitting. Once the resistor has been removed, then replace it again, following the same procedures in reverse.

OEM 2008 Ford Escape Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2008 Ford Escape Blower Motor Resistor, Front Part Number: 3F2Z-18591-AA
$43.05 MSRP: $69.45
You Save: $26.40 (39%)
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor; HVAC Blower Motor Resistor
- Position: Front
- Base No.: 19A706
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-18591-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Control Module Part Number: 9L3Z-19E624-C
$78.60 MSRP: $124.82
You Save: $46.22 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; Controller; Resistor
- Replaces: 7C3Z-19E624-B, 5F9Z-19E624-AA, YH-1827, 7C3Z-19E624-C, 9L3Z-19E624-B
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.5 x 11.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-19E624-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Escape Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Blower Motor Resistor Parts Q&A

Q: How to service the blower motor resistor on 2008 Ford Escape?
A: The blower motor resistor can be serviced by first lowering the glove compartment and dislodging the electrical connector to it. Next, unscrew the two screws which clamped the resistor and have to be screwed in tight to 3 Nm (27 lb-in) when fitting. Once the resistor has been removed, then replace it again, following the same procedures in reverse.