How to service the thermostat housing on a 2.3L engine on 2008 Ford Escape?

A safe method to service the thermostat housing on a 2.3L engine begins with positioning the vehicle in neutral mode on a hoist. Start by draining the cooling system before you proceed to disconnect the accessory drive belt. Detach both hoses from the thermostat housing where they connect to the heater and lower portion of the radiator. Secure the thermostat housing by removing its three securing bolts and gasket. Follow up the new thermostat housing installation by tightening it to 10 Nm (89 lb-in). Inspection of the gasket will determine whether you need to install a new one. The cooling system requires completing with filling and bleeding.

OEM 2008 Ford Escape Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostat Housings found

View related parts
2008 Ford Escape Drain Hose Connector, Rear Part Number: 8L8Z-8592-B
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Sunroof Drain Hose Adapter, Rear
- Position: Rear
- Replaces: RH-182, 8L8Z-8592-A
- Base No.: 8594
- Item Weight: 0.20 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-8592-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Thermostat Housing, Lower Part Number: 2M2Z-8592-CD
$81.94 MSRP: $123.58
You Save: $41.64 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing, Lower; Thermostat Housing Cover; Connection - Water Outlet; Engine Coolant Thermostat Housing; Water Outlet
- Position: Lower
- Base No.: 8592
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M2Z-8592-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS

2008 Ford Escape Thermostat Housing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Thermostat Housing Parts Q&A

Q: How to service the thermostat housing on a 2.3L engine on 2008 Ford Escape?
A: A safe method to service the thermostat housing on a 2.3L engine begins with positioning the vehicle in neutral mode on a hoist. Start by draining the cooling system before you proceed to disconnect the accessory drive belt. Detach both hoses from the thermostat housing where they connect to the heater and lower portion of the radiator. Secure the thermostat housing by removing its three securing bolts and gasket. Follow up the new thermostat housing installation by tightening it to 10 Nm (89 lb-in). Inspection of the gasket will determine whether you need to install a new one. The cooling system requires completing with filling and bleeding.