How to service the thermostat housing on a 2.5L engine on 2009 Ford Escape?

Start by placing a 2.5L engine powered vehicle into neutral mode before mounting it on a hoist for servicing the thermostat housing. The first step should involve draining all the cooling system fluids. The service procedure starts with detaching the heater hose and lower radiator hose from the thermostat housing. The three bolts securing the thermostat housing should be accessible despite engine component obstructions because 1/4-inch drive hand tools are able to reach them. You must remove the three bolts before pulling out the thermostat housing while discarding the old gasket. When installing the new thermostat housing apply a new gasket while using torque to 10 Nm (89 lb-in). The installation process ends with filling your cooling system after performing the removal procedures in reverse order.

OEM 2009 Ford Escape Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostat Housings found

View related parts
2009 Ford Escape Drain Hose Connector, Rear Part Number: 8L8Z-8592-B
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Sunroof Drain Hose Adapter, Rear
- Position: Rear
- Replaces: RH-182, 8L8Z-8592-A
- Base No.: 8594
- Item Weight: 0.20 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-8592-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Water Outlet Part Number: 9L8Z-8592-A
$23.99 MSRP: $32.64
You Save: $8.65 (27%)
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Engine Coolant Inlet Flange; Engine Coolant Water Outlet; Connector; Connection - Water Outlet
- Base No.: 8592
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.4 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-8592-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Limited, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Thermostat Housing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Thermostat Housing Parts Q&A

Q: How to service the thermostat housing on a 2.5L engine on 2009 Ford Escape?
A: Start by placing a 2.5L engine powered vehicle into neutral mode before mounting it on a hoist for servicing the thermostat housing. The first step should involve draining all the cooling system fluids. The service procedure starts with detaching the heater hose and lower radiator hose from the thermostat housing. The three bolts securing the thermostat housing should be accessible despite engine component obstructions because 1/4-inch drive hand tools are able to reach them. You must remove the three bolts before pulling out the thermostat housing while discarding the old gasket. When installing the new thermostat housing apply a new gasket while using torque to 10 Nm (89 lb-in). The installation process ends with filling your cooling system after performing the removal procedures in reverse order.