How to Service the Water Pump on a 2.3L Engine on 2008 Ford Escape?

A 2.3L engine coolant pump replacement process starts with hoisting the vehicle in neutral gear. Start by removing the accessory drive belt from the cooling system after draining it. The service begins with removing the three bolts that hold the coolant pump pulley in place before taking out the pulley. After installation tighten these bolts to 20 Nm (15 lb-ft). The service starts by eliminating the three mounting bolts of the coolant pump and throwing away the old O-ring seal. Install the new pump by tightening it to 10 Nm (89 lb-in). Before proceeding with the pump installation, apply engine coolant on the new O-ring seal then reverse the removal steps. The service ends by filling the cooling system and performing a bleed operation of the system.

OEM 2008 Ford Escape Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Water Pumps found

View related parts
2008 Ford Escape Water Pump Part Number: EU2Z-8501-D
$109.67 MSRP: $176.93
You Save: $67.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 3M4Z-8501-BG, 5M8Z-8501-A, 3M4Z-8501-BJ, 5M8Z-8501-B, PW-481, PW-437, PW-440
- Base No.: 8501
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.4 x 6.3 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EU2Z-8501-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Limited, XLT | 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Water Pump Part Number: 4S4Z-8501-E
$51.39 MSRP: $84.56
You Save: $33.17 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 6M8Z-8501-AC, PW-447, 1S7Z-8501-AK, 4S4Z-8501-AA, 4S4Z-8501-D, PW-465
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-8501-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, S, SE, SEL, Titanium, XLS, XLT, XLT No Boundaries | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
2008 Ford Escape Water Pump Part Number: 5M6Z-8501-A
$169.65 MSRP: $285.60
You Save: $115.95 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Water Pump Repair; Auxiliary Pump
- Replaces: 6M6Z-8C419-A, 5M6Z-8C419-A
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)

2008 Ford Escape Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Water Pump Parts Q&A

Q: How to Service the Water Pump on a 2.3L Engine on 2008 Ford Escape?
A: A 2.3L engine coolant pump replacement process starts with hoisting the vehicle in neutral gear. Start by removing the accessory drive belt from the cooling system after draining it. The service begins with removing the three bolts that hold the coolant pump pulley in place before taking out the pulley. After installation tighten these bolts to 20 Nm (15 lb-ft). The service starts by eliminating the three mounting bolts of the coolant pump and throwing away the old O-ring seal. Install the new pump by tightening it to 10 Nm (89 lb-in). Before proceeding with the pump installation, apply engine coolant on the new O-ring seal then reverse the removal steps. The service ends by filling the cooling system and performing a bleed operation of the system.