How to Service the Fog Light Bulb on 2008 Ford Explorer?

Before servicing the fog lamp bulb start by turning off both headlamp and ignition switches. The vehicle should maintain neutral position while situated on a hoist system. To access the base fog lamp bulb drivers should turn it counterclockwise by one-eighth rotation while disconnecting the electrical attachment at the same time. The Adrenalin fog lamp requires users to initially push the tabs and remove the fog lamp bulb from the assembly then disconnect its electrical connector. Professionals must use the bulb base when handling since pressure-filled gas inside the product creates safety risks which could lead to breakable glass structures. It is essential to leave the assembly without removing the fog lamp bulb until right before putting in a new bulb because allowing contaminants could damage performance. Do not allow fog lamps to operate when their bulbs are absent. The installation process of the new bulb requires you to do the opposite of what was done for removal.

OEM 2008 Ford Explorer Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fog Light Bulbs found

View related parts
2008 Ford Explorer Tail Lamp Bulb, Rear Part Number: C7SZ-13466-B
$1.09 MSRP: $1.55
You Save: $0.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; License Plate Rear; Side Marker Front/Rear; Back Up Rear; Turn Signal; Dome; Map; Tail; Backup Lamp Bulb; Signal, Marker, Brake, Exterior, Overhead, License, and Map Lamp Bulbs.
- Position: Rear
- Replaces: E7GZ-13466-E, F4BZ-13466-E, F4BZ-13466-F
- Base No.: 13466
- Item Weight: 0.20 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: C7SZ-13466-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2008 Ford Explorer Headlamp Bulb, Front Part Number: 5C3Z-13N021-AA
$20.33 MSRP: $28.83
You Save: $8.50 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Exterior Bulbs
- Position: Front
- Replaces: 3F2Z-13N021-AA
- Base No.: 13N021
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-13N021-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Exterior Bulbs, Front Part Number: XL3Z-13466-AA
$10.93 MSRP: $15.50
You Save: $4.57 (30%)
ADD TO CART
Product Specifications
- Other Name: Bulb; Fog Light Bulb, Front; Fog Light Bulbs; Car Bulbs; Fog Lamp Bulb
- Position: Front
- Replaces: 1S7Z-13466-D
- Base No.: 13466
- Item Weight: 0.80 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-13466-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Base, Eddie Bauer, Limited, NBX, Platinum, Postal, Sport, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2008 Ford Explorer Dome Lamp, Front Part Number: F58Z-13466-A
$4.59 MSRP: $6.51
You Save: $1.92 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Dome Light, Front; Map Light, Front; Courtesy Light; Trunk Light; Interior Car Bulbs.; Dome Lamp Bulb; Cargo Lamp Bulb; Map Lamp Bulb
- Position: Front
- Replaces: F4DZ-13466-A
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F58Z-13466-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Backup Lamp Bulb, Amber/Clear, Rear Outer Part Number: E5RY-13466-B
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
- Position: Rear Outer
- Replaces: E9JY-13466-A, F4ZZ-13466-A
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E5RY-13466-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Base, Eddie Bauer, Limited, NBX, Platinum, Sport, XLS, XLS Sport, XLT, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Bulb & Socket Part Number: 6L2Z-13466-A
$3.70 MSRP: $5.25
You Save: $1.55 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Instrument Panel Light Bulb; Car Bulbs
- Base No.: 13466
- Item Weight: 0.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 7
- SKU: 6L2Z-13466-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Tail Lamp Bulb, Rear Inner Part Number: E6DZ-13466-B
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Center High Mount Stop Light Bulb; Rear Back Up Light Assembly; Tail Light Bulbs; Turn Signal Bulbs; Car Bulbs; Backup Lamp Bulb; Signal, Marker, Stop, High Mount Bulbs; Exterior Bulbs.
- Position: Rear Inner
- Replaces: E8GY-13466-B, F4BZ-13466-D
- Base No.: 13466
- Item Weight: 1.20 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E6DZ-13466-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Signal Lamp Bulb, Front Part Number: 6L2Z-13466-AB
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb; Turn Signal & Parking Light Bulb; Front Turn Signal & Parking Light Bulb; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs; Park/Turn Lamp Bulb
- Position: Front
- Replaces: 6L2Z-13466-AA
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-13466-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Tail Lamp Bulb, Rear Lower Outer Part Number: 4L3Z-13466-AB
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Tail Light Bulb, Rear Outer; Brake Light Bulb; Tail Light Bulb; Parking Light Bulb; Tail Light Bulbs; Car Bulbs; Stop Lamp Bulb; Exterior Bulbs
- Position: Rear Lower Outer
- Base No.: 13466A
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 1.8 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-13466-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Tail Lamp Bulb, Front Part Number: C2AZ-13466-C
$1.63 MSRP: $2.32
You Save: $0.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Turn Signal & Parking Light Bulb; License Plate Light Bulb; Side Marker Light Bulb; Tail Light Bulb; Side Marker Bulb; Signal Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; Exterior Bulbs.
- Position: Front
- Replaces: F4BZ-13466-J, E8GY-13466-C
- Base No.: 13466
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.4 x 0.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: C2AZ-13466-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS

2008 Ford Explorer Fog Light Bulb

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Fog Light Bulb Parts Q&A

Q: How to Service the Fog Light Bulb on 2008 Ford Explorer?
A: Before servicing the fog lamp bulb start by turning off both headlamp and ignition switches. The vehicle should maintain neutral position while situated on a hoist system. To access the base fog lamp bulb drivers should turn it counterclockwise by one-eighth rotation while disconnecting the electrical attachment at the same time. The Adrenalin fog lamp requires users to initially push the tabs and remove the fog lamp bulb from the assembly then disconnect its electrical connector. Professionals must use the bulb base when handling since pressure-filled gas inside the product creates safety risks which could lead to breakable glass structures. It is essential to leave the assembly without removing the fog lamp bulb until right before putting in a new bulb because allowing contaminants could damage performance. Do not allow fog lamps to operate when their bulbs are absent. The installation process of the new bulb requires you to do the opposite of what was done for removal.