How to service the ignition coil-on-plug on 2008 Ford Fusion?

You should start servicing the ignition coil-on-plug by taking away all the two nuts and bolt and generator air inlet duct while making sure to tighten these components to 6 Nm (53 lb-in) when reinstalling them. The service procedure starts with disconnecting the four electrical connectors which attach to the ignition coil-on-plug. A twisting motion will help break the seal on ignition coil-on-plugs before removing the four bolts which also take out the ignition coil-on-plugs and require 10 Nm (89 lb-in) torque during installation. Before installing the ignition coil-on-plug boots on the spark plugs you should apply a tiny drop of dielectric grease inside the boots.

OEM 2008 Ford Fusion Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2008 Ford Fusion Ignition Coil Part Number: 6E5Z-12029-BA
$79.34 MSRP: $130.55
You Save: $51.21 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 6E5Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Fusion Ignition Coil Part Number: 6E5Z-12029-AA
$74.52 MSRP: $101.40
You Save: $26.88 (27%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 6E5Z-12029-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS

2008 Ford Fusion Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Ignition Coil Parts Q&A

Q: How to service the ignition coil-on-plug on 2008 Ford Fusion?
A: You should start servicing the ignition coil-on-plug by taking away all the two nuts and bolt and generator air inlet duct while making sure to tighten these components to 6 Nm (53 lb-in) when reinstalling them. The service procedure starts with disconnecting the four electrical connectors which attach to the ignition coil-on-plug. A twisting motion will help break the seal on ignition coil-on-plugs before removing the four bolts which also take out the ignition coil-on-plugs and require 10 Nm (89 lb-in) torque during installation. Before installing the ignition coil-on-plug boots on the spark plugs you should apply a tiny drop of dielectric grease inside the boots.