FordParts
My Garage
My Account
Cart
OEM 2008 Ford Fusion Oil Pan
Oil Drain Pan- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oil Pans found
2008 Ford Fusion Oil Pan Part Number: 9L8Z-6675-A
$137.81 MSRP: $200.60You Save: $62.79 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: 6E5Z-6675-CA
- Base No.: 6675
- Item Weight: 12.40 Pounds
- Item Dimensions: 18.5 x 13.7 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Oil Pan Part Number: 6M8Z-6675-AB
$130.99 MSRP: $190.67You Save: $59.68 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Base No.: 6675
- Item Weight: 12.50 Pounds
- Item Dimensions: 8.7 x 18.5 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6M8Z-6675-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Oil Pan
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Oil Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Oil Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Fusion Oil Pan Parts Q&A
- Q: How to service and repair the oil pan on 2008 Ford Fusion?A: Service and repair of the oil pan starts by placing the vehicle into neutral on the hoist then removing the air cleaner. The removal of battery tray becomes necessary during servicing the automatic transmission of vehicles. Service professionals must limit transmission-to-engine bolt loosening to less than 5 mm (.19 inch) since they adjust the three upper transaxle-to-engine bolts to this value. Remove the underbody cover if it applies along with the seven screws. First tighten only the bellhousing-to-engine bolt on automatic transmission vehicles or the two manual transmission bolts by 5 mm (0.19 inch) before working on the rear engine-to-bellhousing bolt and stud bolt. Start by eliminating the bellhousing bolt connected to the oil pan and then take off the oil pan-to-bellhousing bolt afterward before dragging the transmission 5 mm (0.19 inch) backward. After draining engine oil workers should install the drain plug by torquing it to 28 Nm (21 lb-ft). Finish by uninstalling both the four engine front cover-to-oil pan bolts in addition to the thirteen bolts securing the oil pan.